Wilwood Hi-Temp 570° Racing Brake Fluid 12 oz Bottle IMCA NHRA DoT 3 # 290-0632

Description

Wilwood Hi-Temp 570° Racing Brake Fluid 12 oz Bottle IMCA NHRA DoT 3 # 290-0632
Description
BRAKE FLUID: Due to the extreme operating temperatures of a high performance brake system, standard off-the-shelf brake fluids are not recommended. Of critical importance in determining a fluids ability to handle high temperature applications is the Dry Boiling Point and compressibility. The Dry Boiling Point is the temperature at which a brake fluid will boil in its virgin non-contaminated state. The highest temperature Dry Boiling Point available in a DOT 3 fluid is 572 degrees F.The Wet Boiling Point is the temperature a brake fluid will boil after it has been fully saturated with moisture. The DOT 3 requirement for wet boiling point is a minimum temperature of 284 degrees F.There are many ways for moisture to enter your brake system. Condensation from regular use, washing the vehicle and humidity are the most common, with little hope of prevention. Glycol based DOT 3 & 4 fluids are hygroscopic; they absorb brake system moisture, and over time the boiling point is gradually reduced. Wilwood does not recommend using DOT 5 fluid in any racing applications. DOT 5 fluid is not hygroscopic, so as moisture enters the system, it is not absorbed by the fluid, and results in beads of moisture moving through the brake line, collecting in the calipers. It is not uncommon to have caliper temperatures exceed 200 degrees F, and at 212 degrees F, this collected moisture will boil causing vapor lock and system failure. Additionally, DOT 5 fluid is highly compressible due to aeration and foaming under normal braking conditions, providing a spongy brake feel. Whenever you add fresh fluid to your existing system (never mix fluids of different DOT classifications), it immediately becomes contaminated, lowering the boiling point of the new fluid. For maximum performance, start with the highest Dry Boiling Point available (try Wilwood Hi-Temp 570 Racing Brake Fluid), flush the system completely, and flush it regularly, especially after severe temperatures have been experienced.
# 290-0632 #
BRAND NEW IN BOX
290-0632 — Product Summary
Dry Boiling Point
573 °F
Wet Boiling Point
313 °F
Quantity
1 each
Size
12 oz bottle
UPC
889545069426
HI-TEMP Brake Fluid
Wilwood’s specially formulated Hi-Temp° 570 Racing Brake Fluid has a minimum 570° F. dry boiling point of to withstand the severe heat requirements of automotive racing. Hi-Temp° 570’s low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal.
ABOUT THE MANUFACTURER :
Wilwood Engineering, Inc.
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.
With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.
Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.
Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.
Ask us about saving money with our
PACKAGE DEALS
CP Cometic ACL Ferrea and ARP Kits
Custom Made Package Deals
AEM Package Deals
Package Deals
Ask us about combining purchases for package deal auctions
Pistons
Rods
Bearings
Head and Main Studs
and more...
Shipping
We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
We also offer expedited shipping at an extra cost.
International shipping rate applies to addresses in all other locations
Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated.
Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
Ebay Promotional Shipping is good for shipments going to 48 lower states only.
We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
Shipping charges are non-refundable.
We will gladly combine shipping charges to one charged based on the total weight of the package.   OWNC
Payment & Return
We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.
Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.
International Buyers, please contact us before bidding to discuss the shipping cost.
We always look to satisfy our customers in whatever needs they may have. Please contact us if you have any question.
Please contact us if you have any question.